I have chosen to make a Railway engine for myself .I think this is the best choice because I once had an older one when I was 7 yrs old.It will be used as a perfect toy to put on our collection of wooden toys.For this project,I will have to consider working hard on this project to finish it.
Process
Step One I used some paper to make a full size working drawing of
my Railway engine because so I can see how to make it
Step Two I used a Tri-square to copy the measurements from my drawing onto the project
step Three I marked the square line (at 90°)across and start tracking using a ruler
Step Four I cut off the first piece of wood using the saw
Step Five I then marked out the joint using a marking gauge
Step Six Then I Started cutting out the joint and put first piece on
Step Seven glued the pieces together and then waited for 30 minutes
There is also an Evaluation:How well did I do in completing all of the things that I needed to do for this project is by listening to what Mr.Grundy says and doing the right job.
The helicopter drawing that I made wasn't quite perfect,but it was the choice I decided.
The other things I did: the marking out,the sawing,the chiseling and the assembly,I've done a pretty good job then.
How does it work and does it look good?
Well it takes all the hard work you can start making the project
